If you use the Planning Module and all of your Projects have the Planning function set to Yes, you'll be prevented from entering a Project when configuring your Public Holiday Profiles.
Public Holidays are not compatible with planned projects. To enter a Project for a Public Holiday profile, Planning should be turned off temporarily for the Project you want to use with the Public Holiday profile.
This article will show you, a Nexonia Administrator, how to populate public holidays when using planned projects.
Step 1: On your Nexonia homepage, click the Customers tab.
Step 2: Click Projects.
Step 3: Click into the project you wish to use for the Public Holiday profile.
Step 4: Ensure that Time Off is set to Yes and that Planning is set to No.
Step 5: Click the Gear icon to navigate to Settings.
Step 6: Make sure you're on the Company tab and click Time-Off.
Step 7: Click Public Holiday Profiles.
Step 8: Click Actions, followed by Edit next to the relevant profile.
Step 9: Ensure that the Customer tied to the Project you're using is picked in the Customer section. Then, choose the correct Project.
Step 10: Choose a Task Category and click OK to save.
Step 11: Next, go back to the holiday profile and click Actions followed by Add time entries on public holiday.
Step 12: Choose a Date Range covering all holidays that you want to populate. Then, click OK.
Step 13: Next, click the Customers tab.
Step 14: Click Projects. Then, click into the project that you're using for the Public Holiday profile.
Step 15: Click Edit.
Step 16: Set Planning to Yes. Click Apply when complete.
This gets around the issue of Planned Projects not being available for a Public Holiday profile. Every time you're updating your holidays, this process should be followed. Ideally, this should be done once a year to populate all holidays for that year.